Brother P-touch PT-E110 User Manual page 17

 What to do when
Problem
The display • Check that the batteries are
remains correctly installed. See the
blank after Installing Power Supply and
you have Tape Cassette section.
turned on
• The batteries may be weak.
the P-touch
Replace them.
labeling
• Check that the AD-24ESA Adapter
system.
is correctly connected.
When the
label is
printed, See the Setting Margins section in
there is too this guide and select [Half],
much [Narrow] or [Chain Print] to
margin have smaller margins for your
(space) on labels.
both sides
of the text.
The
P-touch
labeling
• Check that the cassette is inserted
system
correctly.
does not
print, or the • If the cassette is empty, replace it.
printed
• Check that the Tape Cassette
characters
Cover is closed correctly.
are not
formed
properly.
The setting • The batteries may be weak.
has cleared Replace them.
on its own.
• When power is disconnected for
more than three minutes, all text
and formats in the display settings
are cleared.
A blank There may be some dust on the Print
horizontal Head. Remove the cassette and use
line a dry cotton swab to gently wipe the
appears Print Head with an up-and-down
through the motion. See the Installing Power
printed Supply and Tape Cassette section
tape. for the Print Head location.
Find Quality Products Online at:
Solution
GlobalTestSupply
www.
Problem
The
P-touch
labeling
system has
"locked up"
(nothing
happens
For more information, see the
when a key Resetting the P-touch Labeling
is pressed, System section.
even
though the
P-touch
labeling
system is
on.)
The power • The batteries may be weak.
turns off Replace them.
when you
• Check that the batteries are
try to print.
correctly inserted.
• The wrong AC Adapter is used.
We recommend using the
AD-24ESA Adapter.
The tape
• Check that the end of the tape feeds
does not
under the tape guides. For more
feed
information, see the Installing
correctly or
Power Supply and Tape Cassette
the tape
section.
gets stuck
inside the
• The Cutter Lever was pressed while
P-touch
printing. Do not touch the Cutter
labeling
Lever during printing.
system.
To change
For more information, see the
language
Initial Settings section.
setting.
.com
Solution
sales@GlobalTestSupply.com