Remove the system board
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 30
"Remove the M.2 solid-state drive" on page 32
"Remoeve the Wi-Fi card" on page 33
"Remove the fan " on page 35
"Remove the heatsink" on page 37
"Remove the I/O bracket" on page 38
Step 1.
Remove four screws.
Figure 23. Remove four screws
Screw specifications
M2 x L2.7
Step 2.
Disconnect the EDP cable, camera cable, speaker cable, keyboard cable, keyboard backlight
cable, touch pad cable and antenna cable from the system board.
42
Yoga Slim 7i Pro (14", 5), Yoga Slim 7 Pro (14", 5) Hardware Maintenance Manual
Number of screws
4