Figure 18. Remove the type-C bracket
Screw specifications
M2 x L4
Go to
https://support.lenovo.com/partslookup
replacement part:
I/O bracket
Remove the touch pad
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 30
"Remove the battery pack" on page 31
Step 1.
Remove six screws. Then, disconnect the touch pad cable from the system board.
Number of screws
2
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
39