Delivery Set; Technical Specifications - Vitek VT-1193 Manual Instruction

caused by the scale in the thermopot is not
covered by warranty.
•
To remove the scale fill the thermopot with a
mixture of one part ordinary vinegar and two
parts water up to the maximal level mark (15)
«FULL».
•
Insert the power cord (16) connector into the
socket (12) on the thermopot body, and the
power cord (16) plug into the mains socket.
•
The thermopot will be switched on in the boil-
ing mode. After the water boiling disconnect
the power cord (16) plug from the socket and
leave the thermopot filled with the vinegar
solution overnight.
•
In the morning pour out the vinegar solution,
fill the thermopot with water up to the maximal
level «FULL», boil it and pour out the water.
•
You can use special detergents for electric
kettles to remove scale, strictly following the
instructions on the detergent usage.
•
If necessary, perform the cleaning procedure
several times.
STORAGE
•
Before taking the thermopot away for long
storage, unplug it, let the unit cool down and
pour out the remaining water.
•
Clean the thermopot.
•
Keep the thermopot out of reach of children
and disabled persons.

DELIVERY SET

Thermopot – 1 pc.
Power cord – 1 pc.
Instruction manual – 1 pc.

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V ~ 50-60 Hz
Rated input power: 1200-1400 W
Maximal water capacity 4,0 L
IM VT-1193.indd 7
RECYCLING
For environment protection do not throw out the
unit and the batteries (if included), do not discard
the unit and the batteries with usual household
waste after the service life expiration; apply to
specialized centers for further recycling.
The waste generated during the disposal of the
unit is subject to mandatory collection and con-
sequent disposal in the prescribed manner.
For further information about recycling of this
product apply to a local municipal administration,
a disposal service or to the shop where you pur-
chased this product.
The manufacturer preserves the right to change
design, structure and specifications not affect-
ing general principles of the unit operation
without a preliminary notification due to which
insignificant differences between the man-
ual and product may be observed. If the user
reveals such differences, please report them via
e-mail info@vitek.ru for receipt of an updated
manual.
The unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC
Directive 2014/30/EU and to the Low
Voltage Directive 2014/35/EU.
7
ENGLISH
11/26/19 2:32 PM