Merit Megatouch Money Shoot Removal/Installation Instructions

OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DEVICES
Removal/Installation of Major Assemblies -
1. Turn off and unplug the game.
2. Unlock and open the bottom door.
3. Remove the 4 screws securing the electronics box cover. Carefully remove the cover (see
Figure 1).
4. Disconnect all connections to the motherboard, as well as any other harnesses that may
interfere with removal of the board.
5. Remove the 6 screws (3 top and 3 bottom) fastening the edge of the motherboard to the inside
of the electronics box (see Figure 2), then carefully lift the motherboard out of the game and
insert the board into an anti-static bag for storage. NOTE: Be sure to read the Motherboard
Handling Precautions before handling the board.
1. Place the new motherboard in the electronics box and refasten the 6 screws (3 top and 3
bottom) securing it to the inside of the box. See Figure 2.
2. Reconnect all connections to the motherboard, as well as any harnesses that were discon-
nected earlier.
3. Replace the electronics box cover and fasten it with the 4 screws. See Figure 1.
4. Close and lock the bottom door.
5. Plug in and turn on the game.
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
ATTENTION:
Megatouch Money Shoot

Motherboard Removal

Motherboard Installation