LUNA2000-(5-30)-S0
User Manual
5.3.2 Installing DC Input Power Cables
Connect DC input power cables to the inverter
Insert the positive and negative battery connectors (Staubli) into the
corresponding DC input terminals (BAT+ and BAT–).
Step 1 Assemble DC connectors.
Figure 5-8 Assembling DC connectors
Use Staubli MC4 positive and negative metal terminals and DC connectors. Using
incompatible positive and negative metal terminals and DC connectors may result
in serious consequences. The caused equipment damage is not covered under any
warranty or service agreement.
Issue 01 (2020-10-20)
NO TE
The DC input terminals (BAT+ and BAT–) on the left and right sides of the battery are the
same.
CA UTION
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connection
56
Need help?
Do you have a question about the LUNA2000 and is the answer not in the manual?
Questions and answers