LUNA2000-(5-30)-S0
User Manual
Figure 5-3 DC power cable connection inside the battery
After the positive and negative connectors snap into place, pull the DC input
power cables back to ensure that they are connected securely.
----End
5.2.3 Connecting Internal Signal Cables
Connecting Signal Cables Between the Power Control Module and Battery
Expansion Modules
Connect the communications terminals of the power control module and battery
expansion modules in sequence and secure them using cable clips.
Issue 01 (2020-10-20)
NO TE
The DC terminals between the power control module and the battery expansion modules
use the DC connection cable (Amphenol terminal) delivered with the battery.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connection
52
Need help?
Do you have a question about the LUNA2000 and is the answer not in the manual?
Questions and answers