Ip Testing; Option 1: Officeconnect Remote 812 Manager Ping To Isp Or Remote Site Network; Ping Responses - 3Com OfficeConnect 3CP4144 Get Started Manual

3com officeconnect 3cp4144: user guide
Hide thumbs Also See for OfficeConnect 3CP4144:
Table of Contents

Advertisement

problems are resolved, continue to the IP testing section
below.

IP Testing

Run a PING to make sure the OfficeConnect Remote 812
can reach the remote router. You can PING by using the
OfficeConnect Remote 812 Manager, from MS-DOS, or
test the connection through your Internet Service Provider.
PINGing from the OfficeConnect Remote 812 Manager will
test the connection from the OfficeConnect Remote 812 to
the network.
The DOS PING will check the connection from your PC
through the OfficeConnect Remote 812 ADSL Router to
the network.
You can also test the connection using your Internet
Browser, if you have Internet access.
Option 1: OfficeConnect Remote 812 Manager Ping to ISP or
Remote Site Network
Open the OfficeConnect Remote 812 Manager, select
Tools > Ping. Enter the address you wish to ping, whether
it is the ISP or a remote site. Press the Submit button.
A Ping Response screen will appear, with the response from
the ping. The following responses may occur.

Ping Responses

<IPAddress> is alive
The PING was successful.
If a name was entered in the Ping page input field, the
corresponding IP address is displayed on the Response
page.
PING: no route to host
A valid IP address or name was entered but the routing
table does not indicate how to reach the network that the
IP address belongs to.
IP Testing
3-3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OfficeConnect 3CP4144 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Officeconnect 812

Table of Contents