Download  Print this page

Regional Announcement Function; Dynamic Range Control (Drc); Automatic Switching Dab Priority; Automatic Switching From Dab To Rds - Kenwood KTC-9090DAB Instruction Manual

Dab hideaway tuner
Hide thumbs

Advertisement

DAB features (Step Up)
2
Adjust the volume for the
announcement.
3
Press the [TI VOL ADJ] button for at
least 2 seconds. An indication of the
volume blinks once and the volume is
stored in the memory. Announcements
can be heard at this volume.
NOTE
• This setting is valid for both the DAB and
RDS sources.
• This function cannot be set if the "Pre-
setting Volume for Traffic
Information/News" function of the RDS
function is not provided for in the control
unit.
• This function does not reduce the
listening volume in the DAB and tuner
modes. The volume set here is recalled
only when it is larger than the volume
which is currently used in the DAB or
tuner mode.
• Setting the volume unique to the
announcement and turning
Announcement select mode on with the
minimum volume results in only the
desired announcement being heard.
• As for E and F group, refer to the "Pre-
setting the Volume for Traffic
Information/News" of the RDS function.
ABCDEF
Regional Announcement
Function
The interruption of the announcement
such as the Alarm of either a restricted
region where the programme is being
received (regional restriction ON) or all
regions (regional restriction OFF) can be
selected.
Turning Regional Announcement Function
On/Off:
1
Display the menu mode using the
control unit and select a setting item.
2
Switching the setting.
Switch the setting of menu items.
"REG ASW"/ "REG INT"/ "REGA"/ "REG"/
"Regional ASW"
"ON": Regional on
"OFF": Regional off
3
Exit menu mode.
E and F group
Set this function on the DAB Setup
Screen. (page 8, 10)
20
NOTE
This setting is valid only with the DAB
source. The similar function for the RDS
source can be set during reception of an
FM station in the tuner mode.
ABCDEF

Dynamic Range Control (DRC)

In the case that the producer of a
programme wants to adjust dynamic
range, DRC information is transmitted.
Whether to receive the DRC or not can be
selected and set according to listeners'
preference.
1
Display the menu mode using the
control unit and select a setting item.
2
Switching the setting.
Switch the setting of menu items.
"DRC ON": Functioning
"DRC OFF": Not functioning
3
Exit menu mode.
E group
Set this function on the DAB Setup
Screen. (page 8)
F group
Touch [DRC] on the DAB Control Screen.
NOTE
• As the dynamic range is changed based
on the Dynamic Range Control
information sent from a Service provider,
this function does not work whilst no
information is being transmitted from the
Provider.
• When the Dynamic Range Control (DRC)
is set ON, the sound volume is
somewhat lower.
Also, if the DRC data can't be cleanly
demodulated, the DRC may be invalid.
AıÇΉF
Automatic Switching DAB
priority
RDS/DAB provides information when the
DAB service and RDS station are
broadcasting the same programme.
When the receiving signal of a DAB
station deteriorates, the reception can be
switched automatically to the RDS station
broadcasting the same radio programme,
allowing listeners to continue listening to
the same programme.
On the contrary, when an RDS station is
being received, the reception can be
switched automatically to the DAB station
broadcasting the same radio programme,
allowing the same programme to be
heard at a higher sound quality.
Service of DAB:
RDS:
Source mode:
DAB
DAB
DAB
RDS:
Service of DAB:
Source mode:
TUNER
DAB
1
Display the menu mode using the
control unit and select a setting item.
2
Switching the setting.
Switch the setting of menu items.
"DAB PRIORITY"/"DAB-P"
"ON": Functioning
"OFF": Not functioning
3
Exit menu mode.
F group
Set this function on the DAB Setup
Screen. (page 10)
NOTE
• When the receiving signal of a DAB
station deteriorates, the reception can be
switched to the RDS station, however,
when the receiving signal of a DAB
station recovers, the reception can be
switched to the previous condition.
The DAB indicator blinks during the
period of switching to the RDS station.
(except for F)
• Switching the reception from the RDS
station to the DAB station causes
switching the source mode to the DAB
source. After this, every operation enters
DAB mode. For selecting other FM/AM
stations, switch the source mode to the
TUNER source mode before selecting.
• If the tuner of the Control unit provides
no RDS function, this function does not
work.
• It takes at least 10 seconds after
receiving the RDS signal to switch from
the RDS station to the DAB service.
ÅBCDEÏ
Automatic Switching from DAB
to RDS
Presently, the coverage areas of DAB
stations are smaller than those of RDS
stations. Therefore, when the receiving
condition of a DAB station deteriorates,
the reception can be switched
automatically to the RDS station
broadcasting the same radio programme
to minimize the sound interruption. The
DAB indicator blinks during the period of
switching to the RDS station.
Service of DAB:
RDS:
1
Display the menu mode using the
control unit and select a setting item.
2
Switching the setting.
Switch the setting of menu items.
"SW RDS"/ "RDS CHG"/ "RDS"/
"Switching to RDS"
"ON": Functioning
"OFF": Not functioning
3
Exit menu mode.
E group
Set this function on the DAB Setup
Screen. (page 8)
NOTE
• When the receiving signal of the DAB
station recovers, the reception can be
switched to the DAB source.
• If the tuner of the Control unit provides
no RDS function, this function does not
work.
21

Advertisement

loading

  Also See for Kenwood KTC-9090DAB

  Related Manuals for Kenwood KTC-9090DAB