Clock Adjustment - Kenwood XD-852 Instruction Manual

Clock adjustment

58
This unit incorporates a clock function. Be sure to adjust the correct time before using the timer func-
tion. The time is displayed only while the power is off.
1
Select "Clock Options".
MENU
2
Select "Adjust Time".
3
Enter the figure of hour.
To decrease
To increase
the figure
the figure
4
Enter the figure of minute.
To decrease
To increase
the figure
the figure
To display the time
(In standby mode)
(Displayed for approx. 5 sec.)
SELECT
SELECT
SELECT
ENTER
SELECT
Adjust the clock before setting the timer.
The following items can be selected by turning the
MULTI CONTROL jog dial.
("CD Program Play")
("Recording Options")
("Tape Dubbing")
"Audio Options"
"Clock Options"
"Surround Setup"
(Except for XD-7...series)
+Scrolled display (Clock Options)
C l o c k O p t
The following items can be selected by turning the
MULTI CONTROL jog dial.
"Sleep Timer"
"Adjust Time"
"O.T.T."
"Timer Play"
"Auto Power Save"
Example: Adjustment to 8:45
8 : 0 0
(For U.K., Europe and Russia)
0Ô1Ô2...13Ô14...Ô0 ...
÷ The time display starts to blink.
÷ Press the SELECT key. The hour is entered and the
minute display starts to blink.
8 : 4 5
(For U.K., Europe and Russia)
00Ô01Ô02...59Ô00Ô01...
÷ Press the BACK key to return to the previous step and
restart operation from there.
÷ To adjust correct time, press the ENTER key at the same
moment as a time announcement.
÷ When the key is pressed while the "TIMER" indicator is
lit, the timer setup mode is displayed after the clock
display.
÷ The clock display blinks after the power cord has been
unplugged from the AC power outlet and plugged in
again or after a power failure. In this case, set the time of
the day again.
XD-SERIES (EN/M,T)
Lights
i
8 : 0 0 a m
(Other countries)
12 am Ô 1 am Ô 2 am ...
1 pm Ô 2 pm ...Ô 12 am ...
8 : 4 5 a m
(Other countries)