Attachment Assembly - Silvercrest SRB 6 A1 Operating Instructions And Safety Instructions

5. Slide the battery holder
arrow on the battery holder
(see Fig. 5).
Fig. 5
6. Place the battery compartment cap
it onto the hand unit
and secure (see Fig. 1).

Attachment assembly

WARNING - RISK OF INJURY!
► Only change the attachments
switched off.
♦ There are four different attachments
from. Choose the most suitable attachment
task:
Large brush attachment
The large brush attachment
floors and walls.
Small brush attachment
The small brush attachment
such as wash basins, taps and fittings, etc.
Brush attachment for crevices
The brush attachment for crevices
spots such as gaps, corners and joints.
Scrubbing sponge attachment
The scrubbing sponge attachment
cooker and hob surfaces.
♦ Slide the selected attachment
until it clicks into place. Please make sure that both indents on the attachment
holder
(see Fig. 6).
SRB 6 A1
3
back into the hand unit
3
1
until the battery compartment cap
9
8
9
0
slide into the appropriate recesses on the attachment
1
is facing towards the top side of the appliance
4
back onto the hand unit
9 8 7 6
/ / / when the appliance is
9 8 7 6
/ / /
9 8
/ /
is ideal for cleaning large flat areas, such as
is ideal for cleaning uneven surface areas,
7
is ideal for cleaning hard-to-reach
6
is ideal for cleaning pots as well as
8 7 6
/ / / onto the attachment holder
. Make sure that the
1
and push
4
is sitting tight
available to choose
7 6
/ according to the
0
9 8 7 6
/ / /
GB │ IE │ 7 ■