Table of Contents
Advertisement
Using handy features (Continued)
Freezing the image (Freeze)
This function is used to pause or freeze a video during a presentation.
Press the remote control's FREEZE button.
The picture will pause. To release the freeze function, press the
FREEZE button again.
Notes
•
The
icon will appear while the freeze function is in effect.
•
Other operations will also release the freeze function.
•
Even if an image is frozen on the projector, the pictures are running
on the video or other equipment.
•
Using this function on commercial video software, broadcast or
cable-broadcasting except for the purpose of your private viewing
and listening may infringe the copyright protected by the copyright
laws.
Setting the password
How to change password
The default password is 000000.
Select [Password] in the Default setting 2 menu and press the
1
button.
Select [Password registration] from the next menu, and press the
2
button.
The password entry screen is displayed.
3
Enter the current password (6-digit number) using numeric keys of the
remote control.
•
Enter [000000] (6 zeros) for the first change.
•
The password is not displayed. Instead it appears as [******].
4
Enter a new password (6-digit number).
Re-enter the new password for confirmation.
5
Note
•
Please do not forget your password or you will be unable to access the unit. If
that happens, you will need to contact your dealer.
Remote
control
How to set password (from [Off] to [On])
Select [Password] in the Default setting 2 menu and press the
1
button.
Select [Password setting], and press the
2
3
Select [On].
Select [OK] and press the
4
The password entry screen is displayed.
5
Enter the password using the numeric keys of the remote control.
The password setting will be set as [On].
6
How to operate when password is [On]
Turn on the power.
1
The lamp lights and the password entry screen appears.
2
Enter the password using the numeric keys of the remote control.
3
If the entered password is correct, the start-up screen appears and the projector
goes into normal operation. If the password is incorrect, a message will appear
or
prompting you to re-enter the password, and the password entry screen is displayed
again. If you enter an incorrect password more than 5 times, the projector will
automatically power off and enter standby mode.
Note
•
When the password setting is [On], the password function will be enabled only
when the projector is restarted after the power cord has been unplugged.
The password that you set will not be enabled when restarting from standby mode
without unplugging the power cord.
How to set password (from [On] to [Off])
Select [Password] in the Default setting 2 menu and press the
1
button.
The password entry screen is displayed.
Enter the password using the numeric keys of the remote control.
2
Select [Password setting] and press the
3
Select [OFF].
4
Select [OK] and press the
5
or
or
button.
button.
or
or
button.
button.
Advertisement
Table of Contents
