Royalcraft Metal Planter Stand Assembly Instructions

Table of Contents

Download this manual

This product is manufactured from mild steel coated with a weather resistant paint. Steel has a

natural tendency to rust over time and, whilst we expect you to be able to enjoy your furniture

for many years to come, we recommend that you check the product from time to time for signs

of paint damage and/ or rust. If the paint should become damaged, or if rust begins to form,

you should clean the affected area and apply a suitable "thinners based" touch-up paint. Such

paints are readily available for all good hardware and DIY stores."

IMPORTANT, RETAIN FOR FUTURE REFERENCE

Produced in China for A. Mir & Co., Ltd.

Metal Planter Stand

Assembly Instructions

This product is for Domestic Use only!

READ CAREFULLY

Product size:

W60*D42*H91cm

www.royalcraft.co.uk

1 / 4

Table of Contents

Do you have a question about the Metal Planter Stand and is the answer not in the manual?

Page 1 Metal Planter Stand Assembly Instructions Product size: W60*D42*H91cm This product is manufactured from mild steel coated with a weather resistant paint. Steel has a natural tendency to rust over time and, whilst we expect you to be able to enjoy your furniture for many years to come, we recommend that you check the product from time to time for signs of paint damage and/ or rust.
Page 2 Metal Planter Stand Assembly Instructions Before you start Do not use this product if parts are missing, damaged or worn. Warnings Never use scourers, abrasives or chemical cleaner. IMPORTANT, RETAIN FOR FUTURE REFERENCE READ CAREFULLY Never drag furniture when moving it, always lift it.
Page 3 Metal Planter Stand Assembly Instructions Components, fixtures & fittings (not actual size) Parts List Part Part Diagram Qty. Diagram Qty. 1 PC 1 PC Frame Top Tray 1 PC 1 PC Middle Tray Bottom Tray 12 PCS 12 PCS ...
Page 4 Metal Planter Stand Assembly Instructions Step One Stand the Frame (A) and unfold it. Step Two With the help of another person, Assemble the Top Tray (B), Middle Tray (C) and Bottom Tray (D) to the Frame (A) using Washers (DP), Bolts (N10) and Nuts (F4).