Troubleshooting; Others Informations - Zanussi CKZ39-BL User Manual

TROUBLESHOOTING

ISSUES
NO COFFEE
COMES OUT OF
THE APPLIANCE.
THE DEVICE
DOES NOT
WORK, NO
BUTTONS LIGHT
UP.
THE COFFEE IS
NOT HOT
ENOUGH.
THE VOLUME OF
DRINK IS NOT
GOOD.
WATER ON THE
TABLE.
THE LEVER
DOES NOT
CLOSE.

OTHERS INFORMATIONS

Technical information
REFERENCE DEPENDING
COLOURS (MODEL)
POWER SUPPLY
POWER
PUMP PRESSURE
WATER TANK CAPACITY
42 www.zanussismallappliances.nl www.zanussismallappliances.be www.zanussismallappliances.fr
CAUSES
1. The water tank is not
positioned correctly.
2. There is no capsule in the
machine.
3. The lever is not properly
locked.
1. The appliance is not plugged
in.
2. The appliance is in standby
mode.
1. The machine is cold.
2. The cup is cold.
3. Build-up of limescale in the
device.
1. Accumulation of limescale in
the device.
2. Not enough water in the tank.
1. The water tank is leaking.
2. The drip tray is full.
1. The adapter is not placed
correctly.
ON
CKZ39-WH CKZ39-BL
220-240V~ 50/60Hz
1450W
19 bars
600ml
1. Please check if the water tank is
installed correctly.
2. Insert a capsule into the adapter.
3. Raise the lever and lower it until it
locks.
1. Check whether the device is connected
to power supply.
2. Press the ON/OFF button to exit
standby mode.
1. Start a large cup cycle with an empty
adapter to warm the internal circuits of
the appliance.
2. Preheat the cup.
3. Descale the appliance.
1. Descale the appliance.
2. Fill the water tank and press the small
or large cup button to continue the flow.
1. Stop the appliance, remove the water
tank and replace it, checking that the
valve is not blocked.
2. Empty the drip tray.
1. Raise the lever, remove the adapter and
put it back in the correct position.
SPECIFICATIONS
SOLUTIONS