Subscribe to Our Youtube Channel
Related Manuals for Dormakaba 8600 SIS
Summary of Contents for Dormakaba 8600 SIS
- Page 1 8600 SIS, SISJ, SISH, SISJH Spring stop arm for regular, top jamb mount with hold open (SISH, SISJH) Installation instructions 08279171 – 01-2021 | EN |...
-
Page 2: Table Of Contents
8600 SIS, SISJ, SISH, SISJH Installation Instructions Table of Contents Table of contents 1 Technical specifications Overview Tools recommended Handing the door Installation - regular mount Installing the surface closer Surface closer components Securing main arm to door/frame Securing main arm to closer... -
Page 3: Technical Specifications
8600 SIS, SISJ, SISH, SISJH Installation Instructions Technical specifications 1 Technical specifications Overview Caution: sex nuts are required for attachment of Know the swing of the door which is being components to unreinforced doors and to wood installed prior to installation. -
Page 4: Installation - Regular Mount
8600 SIS, SISJ, SISH, SISJH Installation Instructions Surface closer system Regular mount 1.4 Surface closer components The surface closer is comprised of the following components. Closer body Damper assembly Closing/sweep speed adjustment Main arm Optional backplate Cover Dust cap... -
Page 5: Securing Main Arm To Door/Frame
8600 SIS, SISJ, SISH, SISJH Installation Instructions Regular mount 2.2 Securing main arm to door/frame Fig.3 Non-hold open Main/ Pinion connecting screw arm assembly Adjusting Pinion Hold open tube plate Damper/ Damper assembly Right Hand (RH) Left Hand (LH) -
Page 6: Instructions - Top Jamb Mount
8600 SIS, SISJ, SISH, SISJH Installation Instructions Top jamb mount Instructions - top jamb mount 3.1 Installing the surface closer Fig.5 Left hand door shown NOTE: Orient pinion closest to hinge. 3.1.1 Secure closer body to plate. • Use four 1/4-20 x 5/8” flat head screws provided with the plate itself. -
Page 7: Securing Main Arm To Door/Frame
8600 SIS, SISJ, SISH, SISJH Installation Instructions Top jamb mount 3.2 Securing main arm to door/frame Fig.6 7/8"x1/2" torx head shoulder bolt Adjusting tube Damper Left Hand (LH) Right Hand (RH) Configuration Plate Configuration Plate pointing to the LEFT... -
Page 8: Adjustments
8600 SIS, SISJ, SISH, SISJH Installation Instructions Adjust closing speeds Adjust hold open Adjustments Confirm closer spring size prior to making any Maximum opening angle is 110º. closing speed adjustments. Door should close in 3 to 6 seconds from 90º. -
Page 9: Install Covers
8600 SIS, SISJ, SISH, SISJH Installation Instructions Adjust spring force Secure covers 4.3 Adjust spring force Fig.10 Install covers Fig.11 Cover Right hand door shown Dust cap 5.1.2 Screw dust cap onto exposed pinion. 5.1.1 Snap cover over closer body. - Page 10 DORMA USA, Inc. T: 800-523-8483 www.dormakaba.us...
Need help?
Do you have a question about the 8600 SIS and is the answer not in the manual?
Questions and answers