Setting The Clock; Clock Settings; Setting The Disc; Date Settings - Toshiba D-VR600 Owner's Manual

Setting the clock / Setting the disc
You can manually set the date, year and present time
with the remote control.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select "Clock" from "General". For the procedure, see
steps 1 to 3 in "Using the SETUP MENU" on page 20.
Language
Rating
General
Clock
A/V Output
Disc
Timer REC DivX(R)
Recording Restore
Other
Other

Clock Settings

1
Select "Clock Settings" and press ENTER.
2
Press or to select hour, minute and AM/PM.
12 : 00 AM
3
Press or to set the value of the selected item.
10 : 00 AM
4
Repeat steps 2 and 3 to set the hour, minute and
AM/PM.
Then press ENTER.

Date Settings

1
Select "Date Settings" and press ENTER.
2
Press or to select month, date and year.
01 / 01 / 07
3
Press or to set the value of the selected item.
4
Repeat steps 2 and 3 to set the month, date and
year.
Then press ENTER.
2K70101A_E P20-28
Clock
Clock Settings 12 : 00 AM
Date Settings 01 / 01 / 07
Press RETURN to exit
23
This section describes disc setting.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select "Disc" from "General". For the procedure, see
steps 1 to 3 in "Using the SETUP MENU" on page 20.
Language

Format

Rating
New Disc Format
General
Clock
Finalize
A/V Output
Disc
Make compatible
Timer REC DivX(R)
Protect Disc
Physical Format
Recording Restore
Other
Other
Format
You can format a recorded DVD-RAM/-RW/+RW.
Check the content of the disc before format. If you format
the disc, the recorded content of the disc will be erased.
1
Select "Format", then press ENTER.
In case of DVD-RW: The screen below will appear.
Press or to select "VR" or "Video" mode, then
press ENTER.
Disc Setup
Select the format mode.
VR Video
Press RETURN to exit
In case of DVD-RAM, DVD+RW: Go to step 2.
2
The Disc Erase Notification will appear.
Disc Erase Notification
Erase the disc?
Warning: all Information on disc will
be lost.
Yes No
• When you select "Yes" and press ENTER, format
will start. The screen below will appear.
Formatting
45%
• When you select "No" and press ENTER, format
will be canceled.
NOTES:
• You cannot format Ver. 1.0 DVD-RW and DVD-R.
• You cannot format a disc if the disc is protected.
In such a case, be sure to cancel the disc protection
(see "Protect Disc" on page 25) before format.
08`02`07, 20:43
23