Connecting A Dvd Player Or Satellite Receiver And A Vcr - Toshiba 36AFX63 Owner's Manual

Connecting a DVD player or satellite receiver
and a VCR
This connection allows you to watch DVD/satellite, VCR, and TV
programs. You can record one TV channel while watching another
channel.
You will need:
• two (or three, if satellite receiver is used) coaxial cables
• one set of standard A/V cables
• one S-video cable
• one pair of standard audio cables
Stereo VCR
From Cable, Cable
Box, or Antenna
IN from ANT OUT to TV
CH 3
CH 4
TV
ANT-1
S-VIDEO
VIDEO
L /
MONO
AUDIO
R
VIDEO 1
From Satellite Dish
(for Satellite
IN from ANT
Receiver only)
S-VIDEO
OUT
DVD Player/Satellite Receiver with S-video
VIDEO AUDIO
L R
)
ANT( 75
OUT ANT- 2
AUDIO CENTER
CHANNEL IN
Y
VIDEO
P
B
L /
L
MONO L
AUDIO
P
R
AUDIO
VAR/FIX PIP AUDIO
ON
R
R
COLOR R
STREAM
VIDEO 2
INPUT
OUT
IN DVD IN OUT
AUDIO
OUT
L
R
VIDEO
OUT
Note:
• For the highest possible picture quality
from a DVD player/satellite receiver that
does not have component video
connections, use an S-video cable (plus the
standard audio cables) between the TV
and DVD player/satellite receiver. If your
DVD player (or satellite receiver) has
component video, see "Connecting a
DVD player with component video and a
VCR" on page 10.
• Do not connect both an S-video cable and
a standard video cable to VIDEO-1 on the
TV back (or VIDEO-3 on the TV front) at
IN
the same time, or the picture performance
will be unacceptable.
OUT
• Do not connect the DVD player/satellite
receiver and VCR to the same VIDEO input
on the TV. (See the illustration at left, which
shows the DVD player/satellite receiver
connected to VIDEO-1 and the VCR
connected to VIDEO-2.)
The unauthorized recording, use, distribution,
or revision of television programs, videotapes,
DVDs, and other materials is prohibited under
the Copyright Laws of the United States and
other countries, and may subject you to civil
and criminal liability.
OFF
9