Download Print this page

Emerson FB2100 Field Replacement Manual page 5

Flow computer 30w solar panel
Hide thumbs Also See for FB2100:

Advertisement

FB2100/FB2200 Flow Computer 30W Solar Panel Field Replacement Guide
D301824X012
November 2020
Removing/Replacing the 30W Solar Panel
UL Listed Field Installed Accessory Kit for Use in Class I, Division 2, Groups A, B, C, and D
The procedure for replacing the 30W solar panel on the FB2100/FB2200 Flow Computer re-uses
the existing mounting hardware provided with the original solar panel. Save any mounting
hardware/screws/nuts/washers from the original.
Components of Solar Panel
1
2
3
4
5
1.
2.
3.
4.
5.
6.
2
Flow Computer 30W Solar Panel Field Installed Accessory Kit Part No. 395555-02-7 for Use
with UL Listed Class I, Division 2, Groups A, B, C, and D Model Series FB2100 and FB2200.
30w Solar Panel
Adjustable Angle Bracket
Hex screws, flat washers, lock washers, hex nuts
Junction Box
Solar Controller
Disconnect all electrical connections between the flow computer and the solar panel.
With a torque wrench, carefully detach the old solar panel (Item 1) from the adjustable angle
bracket (Item 2) by removing the hex screws, washers, and hex nuts (Item 3). Save all screws,
nuts, and washers.
Attach the new (replacement) solar panel to the adjustable angle bracket using the saved
hex nuts, washers, and screws.
Torque hex nuts to 50 to 60 in-lbs (5.6 to 6.8 N-m).
Apply Loctite
®
222MS Low-Strength Threadlocker sparingly to hex nut threads after
torqueing.
Wire connections between the solar panel and the flow computer. (See
the Solar
Controller)
Removing/Replacing

Advertisement

loading

This manual is also suitable for:

Fb2200