Table of Contents
Advertisement
Connecting a cable converter box
This connection allows you to watch cable and premium channels.
You should keep your TV selected to ANT-1 so that you can use the
TV features. When viewing premium channels, select ANT-2 and
tune the TV to channel 3 or 4 (whichever channel is vacant in your
area), then use the converter box to change channels.
You will need two coaxial cables.
From Cable
ANT (75Ω)
ANT-1
OUT
ANT-2
DVD IN
OUT
IN
VIDEO
VIDEO 2 VIDEO 1
COLOR
Y
STREAM
VIDEO
INPUT
L
MONO
L/MONO
Cb
L
S VIDEO
AUDIO
AUDIO
AUDIO
Cr
R
R
R
IN
OUT
cable converter box
Connecting a cable converter box and a VCR
This connection allows you to watch and record basic and premium
cable channels, as well as watch videotapes. Change the TV to video
mode. Tune the VCR to channel 3 or 4 (the same channel as the cable
box output switch). Use the cable convertor box to change channels.
The PIP source should be set to TV mode. (see page 24)
You will need:
• three coaxial cables
• one pair of audio cables (only one cable for a mono VCR)
• one video cable
• cable splitter
From Cable
IN
cable splitter
OUT
OUT
cable converter box
TV
ANT (75Ω)
ANT-1
OUT
ANT-2
DVD IN
OUT
IN
VIDEO
VIDEO 2 VIDEO 1
COLOR
Y
STREAM
VIDEO
INPUT
L
MONO
L/MONO
Cb
L
S VIDEO
AUDIO
AUDIO
AUDIO
Cr
R
R
R
Stereo VCR
VIDEO
AUDIO
L
R
IN
IN from ANT
OUT to TV
CH 3
OUT
CH 4
Caution:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a S-VHS VCR, use the S-video
connections and remove the video cable. Do
not connect the video cable and the
S-video cable to Video-1 simultaneously.
Page 3
Advertisement
Table of Contents
