Using The V-Chip (Parental Control) Feature; Entering The Pin Code; If You Forget Your Pin Code - Toshiba 32AF43 Owner's Manual

Using the V-CHIP (parental control) feature

The V-CHIP CONTROL menu includes the ENABLE
BLOCKING, SET RATING, SET BLOCKING OPTIONS, NEW
PIN CODE, BLOCK CHANNEL, VIDEO LOCK, and GAME
TIMER functions. You can use these functions after entering the
correct PIN code.

Entering the PIN code

1. Press MENU, and then press x or • until the SET UP menu
appears.
2. Press y or z to highlight V-CHIP CONTROL, and then
press •.
SET UP
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
TIMER: 0 MIN
MORE
MOVE [ ] START [ ]
The PIN code entering screen (BLOCKING RESET or
BLOCKING ACTIVE) appears, as follows:
• BLOCKING RESET status:
Press the Channel Number buttons
(0–9) to store a new 4-digit PIN
code.
• BLOCKING ACTIVE status (when
the PIN code is already stored):
Press the Channel Number buttons
(0–9) to enter the 4-digit PIN code
you previously stored.
If the wrong PIN code is entered,
the message "Incorrect" will appear.
Enter the code again.
3. When the PIN code is entered, the V-CHIP CONTROL menu
(illustrated below) opens.
SET UP
ENABLE BLOCKING [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK OFF
GAME TIMER OFF
[ ]
MOVE [ ] SELECT
Continue to set each V-CHIP CONTROL item as described on
pages 30–35.
SET UP
BLOCKING IS RESET
PLEASE ENTER NEW PIN CODE
_ _ _ _
SELECT [0–9] END [EXIT]
SET UP
BLOCKING IS ACTIVE
PLEASE ENTER PIN CODE
_ _ _ _
SELECT [0–9] END [EXIT]
Note:
The V-Chip feature is only available for the
U.S. V-Chip system. The Canadian V-Chip
system ("Puce-V") is not supported.

If you forget your PIN code:

While the PIN code entering screen
is displayed, press RECALL four
times within 5 seconds. The PIN
code you stored will be released
(returned to BLOCKING RESET
status).
RECALL
Channel
Numbers
yzx •
MENU
29