Huawei Band 3e Manual page 19

1
Open the Huawei Health app, touch Devices, touch your device, and go to Alarm >
EVENT ALARMS.
2
Set the alarm time, tag, and repeat cycle.
3
Touch √ in the upper-right corner to save the settings.
4
Swipe down on the home screen to ensure that the alarm settings are synced to your
band.
For iOS users:
1
Open the Huawei Health app and touch Devices.
2
Touch the band's Bluetooth name from the device list.
3
Go to Alarm > Event alarms.
4
Set the alarm time, tag, and repeat cycle.
5
Touch Save.
6
Swipe down on the home screen to ensure that the alarm settings are synced to your
band.
The Event alarm will ring at the specified time. If you set a tag for the Event alarm, the
•
band will display the tag. Otherwise, only the time will be displayed.
When the alarm rings, tap the touch key to snooze, or touch and hold the touch key to
•
turn off the alarm. If no operation is performed, the alarm will automatically turn off
after snoozing twice.
Your alarm may not work as expected if you restart your band or pair it again with
•
your phone. You are advised to open the Huawei Health app and go to the Devices
screen, touch Alarm to enter the Alarm screen, turn off the alarm, and then turn it on
again.
Setting alarms
18