Convenient Function; Repeat Playback; Using The Real Time Tape Counter - Toshiba MW20FN1 Owner's Manual

Playback (VCR)

Convenient function

Repeat playback

The entire video tape will be played until its end. The tape
will automatically rewind to the beginning and the playback
will be repeated.
1
Press MENU. Press
REPEAT".
MENU
SETUP
ENTER
2
Then press ENTER to select "ON" or "OFF".
If "ON" is selected, the playback
will be repeated endlessly.
ENTER
3
Press MENU until the menu screen is cleared.
If you press DISPLAY, "
appear on the screen
MENU
SETUP
4
To start the playback, press PLAY.
The playback will be repeated
endlessly.
PLAY
To cancel repeat mode:
Follow the above step 1, then press ENTER to select "OFF"
position. Press MENU to return to the TV screen.
The repeat function is canceled automatically when the unit
is switched off.
38
or to select "AUTO
M E N U
TIMER REC SET
TV SETUP
CH SETUP
AUTO REPEAT ON OFF
SYSTEM SETUP
〈 / /ENTER/MENU〉
M E N U
TIMER REC SET
TV SETUP
CH SETUP
AUTO REPEAT ON OFF
SYSTEM SETUP
〈 / /ENTER/MENU〉
" will
.
11

Using the real time tape counter

The On-Screen Real Time Tape Counter shows the tape
running time in Hours, Minutes and Seconds. You can
easily determine how long the tape has been running or
how much time is left on the tape.
1
Press DISPLAY.
DISPLAY
2
Press COUNTER RESET to set the counter to
"00:00:00".
COUNTER
RESET
ANGLE
3
Begin Playback or Recording to start the tape,
the counter will display the elapsed time.
PLAY
4
When you wish to make the counter disappear,
press DISPLAY once again.
DISPLAY
MENU
DISPLAY
REC
PLAY
COUNTER RESET
ENTER
REC