Table of Contents
Advertisement
Scrolling the picture
If the edges of the picture are cut off, you can adjust the
position image.
Note: You can adjust the picture position when the picture
size is set to TheaterWide 2 or TheaterWide 3.
1
From the SETUP menu, highlight Picture Position.
2
Press B or b to select Vertical Position.
3
Press C or c to make the appropriate adjustments.
The adjustment range is from -5 to +10.
Note: This feature is not available on digital channels.
Using the Auto Aspect Ratio
feature
When the auto aspect ratio feature is set to On, the TV
will automatically select the picture size when one of
the following input sources is received:
•A 480i, 480p, 720p, 1080i digital signal from the ANT/
CABLE input
•A 480i signal from the Video 1 or Video 2 input
•A 480i signal from the ColorStream HD1 or HD2
input
•A 480i, 480p, 720p, 1080i, 1080p, or VGA (60/72/
75Hz) signal from the HDMI 1/2/3 input
Note: The auto aspect ratio feature is not applicable to the
PC input.
1
From the PREFERENCES menu, highlight Auto
Aspect.
2
Press C or c to select On, and then press O.
38
Chapter 6: Using the TV's features
Using the 4:3 Stretch
When 4:3 Stretch is activated, the size switching system
changes 4:3 programs into full screen picture.
1
From the PREFERENCES menu, highlight 4:3
Stretch.
2
Press C or c to select On, and then press O.
Note: When Auto Aspect is set to Off, this feature will be
grayed out.
Using the FREEZE feature
1
When viewing the TV, press B to make the
picture a still picture.
2
To return to the moving picture, press B again.
Note: If the TV is left in FREEZE mode for more than 15
minutes, the FREEZE mode will automatically be
released and the TV will return to moving picture.
Using the FREEZE function for any purpose other than
your private viewing may be prohibited under the
Copyright Laws of the United States and other
countries, and may subject you to civil and criminal
liability.
Hide quick links:
Advertisement
Table of Contents
