Using The Freeze Feature; Adjusting The Picture; Selecting The Picture Mode - Toshiba 40G300U Owner's Manual

To turn on the auto aspect ratio feature:
1無
and open the Picture menu.
Press
2無
Highlight Theater Settings and press
3無
In the Auto Aspect Ratio field, select On.
4無
To save the new settings, highlight Done and press
. To revert to the factory defaults, highlight
Reset and press
.
To turn off the auto aspect ratio feature:
Select Off in step 3 above.

Using the FREEZE feature

To use the FREEZE feature:
1無
When viewing the TV, press
picture a still picture.
2無
To return to the moving picture, press
again (or any other button).
Note: If the TV is left in FREEZE mode for
more than 15 minutes, the FREEZE mode
will automatically be released and the TV will
return to moving picture.
Using the FREEZE function for any purpose
other than your private viewing may be
prohibited under the Copyright Laws of the
United States and other countries, and may
subject you to civil and criminal liability.

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from four
different modes, as described below.
Mode Picture Quality
Bright and dynamic picture (factory
Sports
setting)
Standard picture settings (factory
Standard
setting)
Lower contrast for darkened room
Movie
(factory setting)
Designed for viewing of PC tables
PC
and documents
Preference Your personal preferences
Note: PC mode is available for HDMI and PC
inputs only (grayed out for other input sources).
42
Chapter 6: Using the TV's features
To select the picture mode using the menu
system:
1無
Press
.
2無
Highlight Mode and press
3無
Press
prefer and press
to make the
Note: The picture mode you select affects
the current input only. You can select a
different picture mode for each input.
and open the Picture menu.
.
p q
or to select the picture mode you
.
(continued)