Unpack the 80-100kVA Model UPS
The 4400 80kVA UPS has C_channel skids for a base. The skids are bolted to the shipping pallet to secure the UPS dur-
ing shipping. Folow the directions below to unship the 80kVA UPS.
Carefully inspect the UPS for shipping damage. Units shipped within North America and NAFTA are shrink wrapped.
4400 Series Installation and Operation Manual – 64527-008
TOP HEAVY EQUIPMENT. THIS EQUIPMENT WILL TIP OVER EASILY
UNTIL FIXED IN PLACE.
Lift and move carefully, and only with adequate equipment and trained
personnel. IMPROPER LIFTING CAN RESULT IN INJURY OR DEATH.
1. Remove shrink wrap.
2. Unbolt the UPS base from the
3. Use a forklift to lift the UPS off
4. Put down the UPS and remove
5. Use a forklift or pallet jack to transport the UPS to
it's installation location. See Section 8.3.
FIGURE 4.3: UNSHIPPING 80KVA UPS
the shipping pallet.