Page 1
Notice Notice Boehringer Laboratories, Inc. ceased production of 7700 Series Suction Regulators. These suction regulators have been replaced by the 7800 Series Suction Regulators. Please contact your Boehringer Representative or the factory to learn more or request an evaluation of the 7800 Series Suction Regulators. The 5 year warranty on your exiting 7700 units is still being honored, as well as most replacement parts for these units can be ordered from the factory. These instructions for use should only be used for the information they contain on the servicing 7700 Series units, please refer to current instructions for use on the service of 7800 Series units. ...
Page 2
7700 Series Suction Regulator Technical Manual Operating and Maintenance Instructions This Manual Covers Boehringer Regulator Models 7700, 7701, and 7740 7700091 OBSOLETE IFU.docx P/N 2304 Page 1 of 14 Release July 2009 User Manual 7700, 7701, 7740...
Congratulations on your purchase of a Boehringer Suction Regulator. We consider our Suction Regulators to be the best in the world. We are confident it will provide you with reliable, trouble- free, safe patient care and low cost of operation. This product is intended for use by individuals properly trained in suctioning procedures by or on the order of a physician.
Clinical Use - All Models The 7700 Series Continuous Suction Regulators are designed to provide accurate control of wall suction for use in suction therapy procedures in the operating, recovery, intensive care unit, labor and delivery, neonatal, pediatrics, patient bedside, and emergency room.
CAUTION: Full line suction may cause damage to sensitive tissue. Maintenance - All Models Boehringer Regulators have been designed to function for years of trouble-free service with minimum care. To determine the maintenance schedule your medical facility should follow, we recommend the following: •...
Assembly and Lubrication – Continuous Models 7700, 7701 and 7740 (fig. 1) After disassembling and cleaning the instrument, assemble and lubricate as follows. Parts are available from Boehringer Labs and may be ordered by part number (P/N). Part numbers are found in figure 1 at the end of this manual.
5 x 2¾ x 4 *Regulator weights are without fittings. Operating and Storage Limits – All Models We recommend that Boehringer Suction regulators be operated and stored at controlled conditions that typically reflect the medical facility environment. 7700091 OBSOLETE IFU.docx...
Boehringer Laboratories, LLC guarantees all 3700 Series LONG LIFE Suction Regulators for TEN years. The 7700 Series Suction Regulators have a FIVE year warranty with the exception of the gauge which has a one year warranty. Boehringer Laboratories, LLC will also warrant all fittings purchased from and installed by Boehringer Laboratories, LLC for the same warranty period as the suction regulator on which they were originally installed.
Suction Fittings & Accessories Configuration Location Order Number and Description requirement Model 2469 Suction tubing attached directly to the suction regulator High Flow Bubble Barb Patient Connetction Port Suction regulator attached to Model 1487 collection canister, rollstand or DISS Body Adapter trap bottle Model 1492 Diamond Ohio...
Page 11
500 E. Washington Street Norristown, PA USA 19401 Customer Service Technical Support 800-642-4945 www.boehringerlabs.com email: info@boehringerlabs.com Copyright 2004 Boehringer Laboratories, Inc. Medical Product Service, GmbH European Representative: Borngasse 20 35619 Braunfels, Germany Tel: 49.6442.962073 Fax: 49.6442.962074 A free trial evaluation...
Need help?
Do you have a question about the 7700 Series and is the answer not in the manual?
Questions and answers