Going Into Hibernation Mode - Toshiba 2000 User Manual

The Set the range window appears.
Sample Set the range window with DC only option
8 Do one of the following:
❖
❖
9 Click OK to close the Full Power Properties window.
10 Click the Hibernate tab, then click the Enable
hibernate support check box.
11 Click OK to close the TOSHIBA Power Saver Properties
window, then close the Control Panel.

Going into Hibernation mode

If you are not connected to a Windows
(domain server), power off the computer using the
Hibernation command as follows:
1 Click Start, Turn off computer.
Click DC only if you want the settings to apply only
when you are using battery power.
Click All for the settings to apply whether you are
using battery power or outlet power.
Enhancing Productivity
Using Hibernation
®
network server
127