Table of Contents
Advertisement
46
Getting Started
Adding memory (optional)
14
Once the module's connector is fully inserted into the socket,
press downward on the top edge of the module to seat the
module into the latches at the sides of the socket. These latches
should "snap" into place securely with the corresponding
cutouts in the side of the module. If the latches and cutouts do
not line up correctly, repeat steps 13-14.
latch
(Sample Illustration) Pressing down on the memory module
Do not force the memory module into position. The memory
module should be completely inserted into the socket and level
when secured in place.
Memory slot
(Sample Illustration) Inserting the memory module into the slot
15
Replace the memory module slot cover and secure it using the
screw.
latch
Front of computer
Advertisement
Table of Contents
