Table of Contents
Advertisement
Before you install or remove a memory module, turn off the computer
using the Start menu. If you install or remove a memory module
while the computer is in Sleep or Hibernation mode, data will be lost.
NOTE
For this model Slot B is the bottom slot. Slot A is the top slot. If only
one memory module is to be installed, it must be installed in slot A.
If the computer is on, begin at step 1; otherwise, skip to step 3.
1
Click Start, and then click the arrow next to the lock button in
the lower-right corner of the Start menu.
The Shut Down menu appears.
Start
(Sample Image) Shut Down menu
2
Click Shut Down.
The operating system turns off the computer.
3
Unplug and remove any cables connected to the computer,
including the AC adaptor.
4
Remove the main battery. For information on removing the
main battery, see
on page
Adding memory (optional)
"Removing the battery from the computer"
110.
Getting Started
Arrow
Shut Down Menu
51
Advertisement
Table of Contents
