Table of Contents
Advertisement
160
Toshiba Utilities
Fingerprint Authentication Utility
NOTE
If your system supports power-on security, a Power-on button is
also displayed above each enrolled fingerprint. This button is shown
pressed by default, indicating that your fingerprint is automatically
added for power-on authentication.
During fingerprint enrollment, the system displays icons as
prompts, notifications, and warnings. These icons and their
meanings are as follows:
❖
Reader ready—the reader is waiting to read your fingerprint.
Swipe your finger when you are ready.
❖
Reader busy—wait for the reader to complete its operation.
❖
Problem with operation—the reader could not read your
fingerprint. Swipe your finger again.
❖
Operation succeeded—the reader successfully read or verified
your fingerprint.
❖
Failed to verify the user—the fingerprint could not be matched.
❖
Error reading fingerprint—the finger was too far to the left or
right. Center your finger and swipe it again.
❖
Error reading fingerprint—the movement was skewed. Swipe
your finger again in a straight line.
❖
Error reading fingerprint—the movement was too fast. Swipe
your finger again at a slower speed.
❖
Error reading fingerprint—the movement was too short. Swipe
your finger again using a longer motion.
Fingerprint Logon
The fingerprint utility enables logon to your computer using
fingerprints. During user enrollment, fingerprint samples are saved
and associated with the user's Windows
user attempts to log on again, the user's fingerprint is read and
compared with the user's enrolled fingerprints; if the fingerprint is
recognized, user logon is completed.
If you do not use a Windows
define a new (non-empty) one. This is not necessary, but a password
improves the security of your software.
®
password, you will be prompted to
®
user account. When the
Advertisement
Table of Contents
