Toshiba L35-S1054 User Manual page 56

56
Getting Started
Adding memory (optional)
NOTE
NOTE
11 Pick up the memory module by its sides, avoiding any
contact with its connector. Position the module toward
the socket, aligning the connector's notch with the
matching key in the socket.
notch
latch
key
(Sample Illustration) Aligning the memory module with the socket
12 Firmly press the memory module into the memory slot's
socket at approximately a 30-degree angle (to the
horizontal surface of the computer).
(Sample Illustration) Inserting the memory module into the
socket
If no memory slot is available, you must remove a module by
performing steps
page 58.
If your system has the memory modules stacked on top of one
another, you must remove the top module first before
removing/installing the bottom module.
2-3 of "Removing a memory module" on
connector
latch