Toshiba 1110-S153 User Manual page 48

48
Getting Started
Installing additional memory (optional)
8 Gently put the memory module connector down at an
angle and press down until the clips snap into place.
Do not force the module into position. The memory
module should be level when secured in place.
Inserting the memory module
CAUTION: Avoid touching the connectors on the memory module
or on the computer. Grease or dust on the connectors may cause
memory access problems.
9 Replace the expansion memory slot cover.
10 Replace the screws and tighten them.
11 Turn the computer over and reconnect any cables you
removed.
12 Turn on the computer.
To verify that the computer correctly recognizes the
memory, click Start, Control Panel and click
Performance and Maintenance. Click System to view
the recognized memory.
13 If the computer does not recognize the memory, shut
down the computer, remove the memory slot cover, and
make sure the memory module is seated properly, as
described in step 8.