Loading Photo Paper - Canon PIXMA TS700 Series Getting Started

Loading Photo Paper

Photo paper can only be loaded in the rear tray.
1
Open the paper support and the paper support
extension.
a
2
Open the feed slot cover and slide the right-
hand side paper guide to the far right.
a
3
Load several sheets of photo paper with the
print side facing up and slide the side paper
guide against the edge of the paper stack.
a
b
Printing a Disc Label Using the Multi-Purpose Tray
You can print a label on a printable disc using the multi-purpose tray.
For details, open the Online Manual and click Basic Operation>Printing a Disc Label from a Computer.
Note
•
The multi-purpose tray is attached to the underside of the cassette.
•
Refer to the back cover of this manual for how to open the Online Manual.
8
b
b
4
Close the feed slot cover.
5
When the following screen appears, press the
OK button.
6
Select the paper size and type, and press the OK
button.
7
Pull out the paper output tray and the paper
output support.
a
b
"1. Box Contents" on page 1