Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Dors 1250
Summary of Contents for Dors 1250
- Page 1 UNIVERSAL COUNTERFEIT DETECTOR USER MANUAL...
-
Page 2: Table Of Contents
Verification in a white transmitted light and IR transmitted light....14 Size verification..................1 5 OPERATION WITH VIDEO MAGNIFIER DORS 1010/1020.................... 15 OPERATION WITH REMOTE OPTICAL MAGNIFIER DORS 10 AND DETECTOR VISUALIZER OF MAGNETIC AND IR MARKS DORS 15......................16 VISUAL INSPECTION WITH THE DORS 10........... 17 MAGNETIC VERIFICATION WITH THE DORS 15.......... -
Page 3: Purpose
A top infrared (hereafter – IR) light source emitting in the 850-940 nm wavelengths; at specific points. 7. Verify a presence of magnetic marks when using the DORS 15 detector ■ A top white oblique light source; of magnetic and IR marks. -
Page 4: Important Information
REPLACED, IT SHALL BE HANDED IN TO THE SERVICE OF FLUORESCENT LAMPS DISPOSAL. Connector V for the DORS 1010 DEVICE WITH ITS UV-LAMPS BEING VISIBLE FOR (DORS1020) connec- tion. THE OPERATOR UNIVERSAL COUNTERFEIT DETECTOR DORS 1250 UNIVERSAL COUNTERFEIT DETECTOR DORS 1250... -
Page 5: Preparing For Operation
In this case, touch the screen to call the menu. In this mode the screen will LANGUAGE, AUTO OFF (see Fig. 3). show the menu during 5-7 seconds since the last touch. UNIVERSAL COUNTERFEIT DETECTOR DORS 1250 UNIVERSAL COUNTERFEIT DETECTOR DORS 1250... -
Page 6: Illumination Mode Selection
30 MINUTES power consumers of the device get switched on the device screen. off. To wake from the standby mode, touch DISABLE the display. Fig. 8. AUTO OFF timer setting UNIVERSAL COUNTERFEIT DETECTOR DORS 1250 UNIVERSAL COUNTERFEIT DETECTOR DORS 1250... -
Page 7: Language Selection For The Menu And Information Messages
The source of top white light is LED with a considerably high brightness, so PLEASE DO NOT LOOK AT THE TOP WHITE LIGHT SOURCE. UNIVERSAL COUNTERFEIT DETECTOR DORS 1250 UNIVERSAL COUNTERFEIT DETECTOR DORS 1250... -
Page 8: Verification In A White Reflected Light
OPERATION WITH VIDEO MAGNIFIER DORS 1010/1020 LOOK AT THE TOP WHITE LIGHT SOURCE. Connect the DORS 1010 video magnifier (see Fig.16) or the DORS 1020 Fig. 14. Switching on the (see Fig.17) to jack V () (see Fig. 1) on the device rear panel. -
Page 9: Operation With Remote Optical Magnifier Dors 10
Switch on the device. Press the LIGHT-SELECT key () (in case of the DORS 1010) or SELECT () (in case of the DORS 1020) on the top of a magnifier. The device automatically switches to the mode of image examination with a magnifier. -
Page 10: Return To The Factory Settings
Put the DORS 15 on a banknote in such a way that the area to be examined To switch off detector DORS 15, press and hold the SELECT key () during is under the sensor (). Moving the sensor along the area to be examined, 3 s. -
Page 11: Uv-Lamp Replacing Procedure
To replace the fluorescent lamps, please use the lamps of the same type as the lamp has fixed in the holders. installed in the device. The suggested type of UV lamp is DORS TL 6W/08 F6T5/ Put on a protection cover () on each lamp holder () (no tool is BLB. -
Page 12: Troubleshooting
Two wavelengths in IR blink mode............850/940 nm Video signal standard..................PAL Linear magnification on display: at the use of the DORS 1010........11x at the use of the DORS 1020 ........22x Operating temperature...............+5 to +40 C о UNIVERSAL COUNTERFEIT DETECTOR DORS 1250...
Need help?
Do you have a question about the 1250 and is the answer not in the manual?
Questions and answers