Part Names .......................................................................8
is attached .................................................................. 11
Binding Cables ...............................................................12
Turning power on/off ..................................................15
For information on the touch panel driver, see the Touch Panel Driver Operation Manual. For information on the Pen Software,
see the Pen Software Operation Manual.
If any component should be missing, please contact your dealer.
Liquid Crystal Display Monitor: 1
Remote control unit: 1
Cable clamp: 2
Power cord
R-6 battery ("AA" size): 2
CD-ROM (Utility Disk for Windows): 1
Setup Manual: 1
Stand hole protection cover: 2
* Sharp Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.
To use the touch panel, the touch panel must be connected to a computer, and the touch panel driver and Pen Software must be
installed on the computer from the supplied CD-ROM. System requirements for each software program are as follows.
Computer
OS
CPU
Memory
Free space on hard drive
To connect the touch panel and install the touch panel driver, see the Touch Panel Driver Operation Manual.
To install the Pen Software, see the Pen Software Operation Manual.
Contents
Supplied Components
Vertical sticker (Operation panel): 1
Vertical sticker (Logo): 1
Touch pen: 1
Pen tip (for touch pen): 2
Touch pen battery
(LR-03 ("AAA" size)): 1
USB cable: 1
Power switch: 1
System Requirements
PC/AT compatible computer with a USB 1.1 port and able to output a resolution of 1920 x 1080.
(CD-ROM drive required for software installation.)
Windows XP (32-bit or 64-bit version), Windows Vista (32-bit or 64-bit version), Windows 7 (32-bit
or 64-bit version)
Intel Celeron or AMD Sempron 1.6 GHz or faster
Intel Core 2 Duo or AMD Athlon II X2 2.8 GHz or faster recommended
At least 2 GB (at least 1 GB for Windows XP)
At least 100 MB (free space separately required for data storage)
Eraser .........................................................................17
Basic Operation .............................................................18
Menu Items .....................................................................20
(FUNCTION) ....................................................................27
PC connection ............................................................28
Troubleshooting .............................................................46
Specifications ................................................................48
Eraser: 1
Holder: 1 (With 2 hook and loop fasteners)
Cover Sharp logo: 1
Place this sticker onto the SHARP logo to
cover the logo.
7
E