Antennas With 75-Ohm Round Leads; Separate Vhf And Uhf Antennas; Connecting Cable Tv; Cable Without A Cable Box - Samsung TXN2034F Owner's Instructions Manual

Hide thumbs Also See for TXN2034F:
Table of Contents

Advertisement

I
N S TA L L AT I O N

Antennas with 75-ohm Round Leads

1
Plug the antenna lead into
the VHF/UHF
terminal on the bottom of
the back panel.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV. This
procedure requires an optional combiner-adaptor (available at most electronics shops).
1
Connect both antenna
leads to the combiner.
2
Plug the combiner into the
VHF/UHF terminal on the
bottom of the rear panel.

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

1
Plug the incoming cable
into the VHF/UHF antenna
terminal on back of the TV.
16
Because this TV is cable-ready,
you do not need a cable box to view
unscrambled cable channels.

Advertisement

Table of Contents
loading

Table of Contents