Colour Coding On The Dispensing Hoses; Maintenance - Miele DOS G 80 Fitting Instructions Manual

Colour coding on
the dispensing
hoses
Connecting the
power supply
DOS G 80 / 72
Fill or replace the container, fit the siphon and secure the lid.

Feed the siphon into the container until it reaches the bottom.

Instructions for venting the dispensing system and setting the dos‐
age are given in the Operating instructions for your washer-disin‐
fector.
To differentiate between the containers when using more than one
DOS module, the hoses must be colour coded using the coloured la‐
bels supplied.
Stick the label near the siphon and one of the same colour close to

the free end of the hose to enable clear identification.
Miele use and recommend the following for DOS G 80:
– blue: for cleaning agent
– red: for rinsing agent
Connections for the electricity supply are located at the back of the
machine.
(These are described in detail in the Operating instructions for your
washer-disinfector).
Connect the module to the electricity supply.

DOS G 80 / 72 is supplied without a plug and is designed for direct
connection to the PG 8172 tank dishwasher.

Maintenance

The dispensing system should be serviced at the same time as the
washer-disinfector by Miele Service.
en - Connection
41