Viewing An External Signal Source - Samsung HL-P4667W Instruction Manual

Viewing an External Signal Source

Use the remote control to switch between viewing signals from connected equipment,
such as a VCR, DVD, Set-Top box or the TV source (broadcast or cable).
Setting the Signal Source
1
Press the MENU button.
Press the ENTER button to
select "Input".
2
Press the ENTER button to
select "Source List".
Press the ... or † button to
select a signal source, then
press the ENTER button.
• When you connect
equipment to the TV,
you can choose
between the following sets of jacks: "AV1", "AV2",
"S-Video1", "S-Video2", "Component1", "Component2"
or "HDMI" on the TV's rear panel and "AV3" or
"S-Video3" on the TV's side panel.
• HDMI input can be selected only when the external
device is turned on and the connector for it is linked.
Alternate method
Press the SOURCE button on the
remote control repeatedly to
select an external signal source.
Input
Input
Source List : TV
Edit Name
Picture
Anynet
Sound
Channel
Setup
Guide
Move Enter Return
Source List
TV
Input
AV1 ---
Picture
AV2 ---
Sound
AV3 ---
S-Video1 ---
Channel
S-Video2 ---
Setup
▼ More
Guide
Move Enter Return
AV1
√
√
English - 43