Parts Description - Makita XEC01 Series Instruction Manual

12. Use the batteries only with the products
specified by Makita. Installing the batteries to
non-compliant products may result in a fire, exces-
sive heat, explosion, or leak of electrolyte.
13. If the tool is not used for a long period of time,
the battery must be removed from the tool.
SAVE THESE INSTRUCTIONS.
CAUTION:
Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting
causing fires, personal injury and damage. It will
also void the Makita warranty for the Makita tool and
charger.

PARTS DESCRIPTION

2
1
7
1 Abrasive cut-off wheel /
diamond wheel
5 Lock-off button
9 Battery indicator
13 Handle
17 Shaft lock button
3
11
12
13
14
2 Wheel guard
6 Hook
10 Overload indicator
14 Water inlet
18 Coupling sleeve
Tips for maintaining maximum
battery life
1. Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2. Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
3. Charge the battery cartridge with room tempera-
ture at 10 °C - 40 °C (50 °F - 104 °F). Let a hot
battery cartridge cool down before charging it.
4. Charge the battery cartridge if you do not use
it for a long period (more than six months).
4
5
8
6
10
15
3 Grip
7 Lamp
11 Lamp button
15 Cock
- -
6 ENGLISH
9
17
16
18
4 Cover (for battery
compartment)
8 Check button
12 Switch trigger
16 Cover (for V-belt)
- -