Table of Contents
Advertisement
Time Segmentation
Time segmentation is used to divide 24 hours into different
sections and to distribute power according to each section.
This function is used when the power consumption fee is
different according to different time slots or when a building is
charged differently depending on the consumption time.
Time can be divided into 1 section (a), 2 sections (a,b,a), and 3
sections (a,b,c,b,a).
When the time is divided into 2 or 3 sections, you should install
S-NET 3 to calculate or view the distributed power on each
section.
DMS will always show the result of the power distribution on
section 1, regardless of section 2 or 3.
For 2 sections, 24 hours can be divided as follow:
00 : 00
08 : 30
Time Division A
CAUTION
If communication error occurs between DMS and the
lower level controllers, actual power usage and the
result of power distribution value may not be same.
Communication error example:
- Between DMS and SIM transmitter
- Between SIM transmitter and Watt-hour meter
- Between DMS and Centralized controller
- Between Centralized controller and Transmitter
- Between Transmitter and indoor/outdoor units
17 : 30
Time Division B
24 : 00
Time Division A
9
E-
Advertisement
Table of Contents
