Using The Accessories - AEG BCK642020M User Manual

Table of Contents

Advertisement

6. When the set time ends, an acoustic
signal sounds for two minutes.
flashes.
7. Touch a sensor field or open the
oven door to stop the acoustic
signal.
8. Deactivate the appliance.
8.5 Automatic programmes
with the core temperature
sensor (selected models)
The core temperature of the food is
default and fixed in programmes with the
core temperature sensor. The
programme ends when the appliance is
at the set core temperature.
1. Activate the appliance.

9. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
9.1 Core temperature sensor
The core temperature sensor measures
temperature inside the food. When the
food is at the set temperature, the oven
turns off.
There are two temperatures to be set:
• the oven temperature (minimum 120
°C),
• the food core temperature.
CAUTION!
Use only the core
temperature sensor supplied
and the original replacement
parts.
Directions for the best results:
• Ingredients should be at room
temperature.
• Core temperature sensor cannot be
used for liquid dishes.
• During cooking the core temperature
sensor must remain in the dish and
the plug in the socket.
• Use recommended food core
temperature settings. Refer to "Hints
and tips" chapter.
2. Touch
again and again until the
display shows
3. Install the core temperature sensor.
Refer to "Core temperature sensor".
4. Touch
or
programme for the core temperature
sensor.
The display shows the cooking time,
and
.
5. Touch
or the settings save
automatically after five seconds.
When the set time ends, an acoustic
signal sounds for two minutes.
flashes.
6. Touch a sensor field or open the
door to stop the acoustic signal.
7. Deactivate the appliance.
The aoven calculates the
approximate cooking time, it
may change.
When you put the core
temperature sensor into the
socket, you cancel the
settings for the clock
functions.
Food categories: meat, poultry
and fish
1. Activate the appliance.
2. Insert the tip of the core temperature
sensor (with
on the handle) into
the centre of the meat or fish, in the
thickest part as possible. Make sure
that at least 3/4 of the core
temperature sensor is inside of the
dish.
3. Put the plug of the core temperature
sensor into the socket located in the
front frame of the appliance.
ENGLISH
15
.
to set the

Advertisement

Table of Contents
loading

Table of Contents