Included with product:
Main unit
Unpack the product and remove all packaging. Check that the above components
are all included. Now to fit the handle to the main unit. You're going to need a cross-
head screwdriver.
The dirty water container (8) is already inserted in the main unit.
SC17320N_IMindd.indd 7
BEFORE FIRST USE
2.8m Upholstery
nozzle with hose
Insert the handle (1) into the opening of the container sup-
port (14) and align it so that the curved end of the handle
(1) points towards the back of the device. Fix the handle
(1) in place using the two screws.
Insert the fresh water container (2) into the container
sup- port (14). When you do this, make sure that the
locking lugs on the fresh water container (1) fit in the
recesses in the container support (14). Press the fresh
water container (2) against the handle (1) until you hear it
engage.
7
1 x handle
1 x water tank 2 x screws
(mounted
on main
unit)
27/02/2019 08:35