ABB EasyLine EL3060 Series Instructions For Installation Start-Up And Operation page 55

Overview of the functions
Function
Automatic calibration:
Start/cancel automatic calibration (also possible via digital
inputs)
Activate/deactivate cyclically time-controlled automatic
calibration
Cycle time of the automatic calibration
End-point calibration together with zero-point calibration
Date and time of the next automatic calibration (start of the
cycle)
Test gas concentration
Purging times
Output current response (for automatic and manual calibration)
Calibration method (Magnos206)
Manual calibration:
Calibration method
Test gas concentration
Execute calibration
Maintenance functions:
Calibration reset
Calibration of the pressure sensor / Set atmospheric pressure
value
Measuring calibration cell (Uras26)
Drift, delta drift (display)
Software version
Status information
Component parameters:
Range limits
Alarm value parameters
Low pass time constant (T90 time, filter)
Active component
4)
Modbus parameters
5)
Profibus parameters
Ethernet parameters
Signal inputs and outputs (I/O connections)
4) For detailed Information on "Modbus", refer to the Technical Information "EL3000,
EL3060, EL3010-C – Modbus".
5) For detailed information on "Profibus", refer to the Technical Information "EL3000,
EL3060 – PROFIBUS DP/PA Interface".
Operating the Gas Analyzer
Instrument Configurator Modbus
X
X X
X
X
X X
X X
X X
X
X X
X X
X X
X
X
X
X
X
X X
X
X X
X
X
X X
X
X
X X
X
55
X
X
X
X
X
X
X
X