Troubleshooting - AEG A52200GSW0 User Manual

28 www.aeg.com

7. TROUBLESHOOTING

WARNING!
Before troubleshooting, discon-
nect the mains plug from the
mains socket.
Only a qualified electrician or
competent person must do the
troubleshooting that is not in this
manual.
Problem
The appliance does
not operate. The Pi-
lot light does not
flash.
The Pilot light flash-
es.
The Alarm light
flashes.
The compressor op-
erates continually.
The temperature in
the freezer is too
low.
The temperature in
the freezer is too
high.
Possible cause
The appliance is switched
off.
The mains plug is not
connected to the mains
socket correctly.
The appliance has no
power. There is no volt-
age in the mains socket.
The appliance is not
working properly.
The temperature in the
freezer is too high.
The temperature is not
set correctly.
The door is not closed
correctly.
The door has been
opened too frequently.
The product temperature
is too high.
The room temperature is
too high.
The temperature regula-
tor is not set correctly.
The temperature regula-
tor is not set correctly.
Solution
Switch on the appliance.
Connect the mains plug to
the mains socket correctly.
Connect a different electri-
cal appliance to the mains
socket.
Contact a qualified electri-
cian.
Contact a qualified electri-
cian.
Refer to "Excessive Tem-
perature Alarm"
Set a higher temperature.
Refer to "Closing the
door".
Do not keep the door
open longer than necessa-
ry.
Let the product tempera-
ture decrease to room
temperature before stor-
age.
Decrease the room tem-
perature.
Set a higher temperature.
Set a lower temperature.