Troubleshooting; Warning Indicators And Messages; Power Source - Samsung VP-DX10 User Manual

troubleshooting

TROUBLESHOOTING
Before contacting a Samsung authorised service centre, perform the following simple checks.
They may save you the time and expense of an unnecessary call.

Warning indicators and messages

Power source

Message Icon
Low Battery
Storage media
Message Icon
Memory Full
Card Full
Insert Disc
Disc Full
Finalised Disc
Not Supported Disc
Disc Error
Write Error
Not Supported Card
106_ English
Informs that...
The battery pack is almost discharged.
Informs that...
There is not enough memory to record.
There is no enough space to record in the
memory card.
There is no disc in DVD camcorder.
There is not enough disc space.
The disc is finalised.
The disc is not recognised in the DVD
camcorder. The disc is finalised in the camcorders
manufactured by other companies.
File system does not match to the disc.
Disc is formatted in the PC.
Your disc or memory card has some problems in
writing datas.
The memory card is not supported in this
camcorder.
Action
Replace with a charged battery or connect the AC power adaptor.
(If the AC power adaptor is connected when "Low Battery" is
displayed, the power is turned off and the charging starts.)
Action
Delete unnecessary files on the built-in memory.
Use another storage media. page 31
Delete unnecessary files on the memory card.
Use another storage media. page 31
Insert a disc.
Change to a new disc. Erase recorded image.
To record on a DVD-RW/+RW disc, unfinalise it.
The supported discs are DVD-R, DVD+R DL, DVD-RW and
DVD+RW. Use a new disc.
Reformat the disc for –RW/+RW.
Scratch should not be on the surface of the disc.
To recover previous data in your disc or memory card, turn the
power off and on.
After recovering data, the system will be switched to STBY mode.
If it fails to recover data, "Disc Error" or "Card Error" appear.
Change the memory card that we recommended. pages 32-33