Samsung ML-2165 User Manual page 96

Installing driver over the network
Command- line Definition
/d or Uninstalls all device
drivers and applications
/D
from your system.
/v"<share name>" or Shares installed machine
and add other available
/V"<share name>"
platform drivers for Point
& Print.
/o or Opens Printers and
Faxes folder after
/O
installation.
/f"<log filename>" or Specifies log filename.
/F"<log filename>" The default log file is
created in the system
temp folder if not
specified.
/h, /H or /? Shows Command-line
Usage.
Description
This command will remove
all installed device drivers
and application software
from your system.
It will install all supported
Windows OS platform's
machine drivers to system
and share it with specified
<share name> for point and
print.
This command will open
Printers and Faxes folder
after the silent installation.
It will create a log file to a
specified folder.
7
Macintosh
1 Make sure that the machine is connected to your network and powered
on.
Insert the supplied software CD into your CD-ROM drive.
2
Double-click the CD-ROM icon that appears on your Macintosh desktop.
3
4 Double-click the MAC_Installer folder > Installer OS X icon.
5 Click Continue.
6 Read the license agreement and click Continue.
7 Click Agree to agree to the license agreement.
8 When the message which warns that all applications will close on your
computer appears, click Continue.
9 Click Continue on the User Options Pane.
If you have not set the IP address yet, click Set IP address and refer to "IPv4
configuration using SetIP (Macintosh)" on page 91. If you want to set the
wireless setting, refer to "Setup using Macintosh" on page 120.
2. Using a network-connected machine
96