Samsung ML-2165 User Manual page 108

Wireless network setup
Machines with a display screen
Connecting in PBC mode
1 Press and hold the (WPS) button on the control panel for more than
2 seconds.
The machine starts waiting for up to two minutes until you press the WPS
(PBC) button on the access point (or wireless router).
Press the WPS (PBC) button on the access point (or wireless router).
2
The messages are displayed on the display screen in the order below:
a Connecting: The machine is connecting to the access point (or
wireless router).
b Connected: When the machine is successfully connected to the
wireless network, the WPS LED light stays on.
c AP SSID: After completing the wireless network connection process,
the AP's SSID information appears on the display.
Connecting in PIN mode
1 Press and hold the (WPS) button on the control panel for more than
2 seconds.
The eight-digit PIN appears on the display.
2
You need to enter the eight-digit PIN within two minutes on the
computer that is connected to the access point (or wireless router).
The messages are displayed on the display screen in the order below:
a Connecting: The machine is connecting to the wireless network.
b Connected: When the machine is successfully connected to the
wireless network, the WPS LED light stays on.
c SSID Type: After completing the wireless network connection process,
the AP's SSID information is displayed on the LCD display.
2. Using a network-connected machine
108