Trouble Shooting - Connex CX24A19 Instruction Manual

Trouble Shooting

Problem
Make sure the power cord is plugged in.
TV does not
Try another AC outlet.
operate
Unplug unit for an hour, then plug it back in.
Check the volume settings.
Normal picture, but Sound muted? Press MUTE button.
no sound Try another channel.
Check audio cable connections.
Make the remote control is in range with no obstructions.
The remote control
Check the batteries.
does not work
Correct operating mode set: TV, VCR etc.
Station or Cable TV experiencing problems, tune to another station.
Poor sound or no
Check sound adjustments (Volume or Mute).
sound
Check for sources of possible interference.
Station or Cable TV experiencing problems, tune to another station.
Make sure channels are set into memory.
Poor picture or no
Check antenna or Cable TV connections, adjust antenna.
picture
Check for sources of possible interference.
Check picture control adjustments.
Adjust the antenna position to a stronger signal receiving angle.
Check the Antenna connection is tight to the TV.
Poor TV reception
Check there is power supplied to the Antenna distribution box.
RV.
Ensure the internal RV coax jump cable is connected to the correct port.
Check incoming Cable is connected correctly to RV.
Poor Cable /
Ensure cable splitter box has power.
Satellite TV
Reception RV.
Ensure the internal RV coax jump cable is connected to the correct port.
Check Dish has not obstruction.
Sleep Timer is set.
Power interrupted.
TV AV input plays Check RCA connections on the back of the TV and from the source to ensure they are connected to
black and white the correct connections. Ensure the yellow connection is in the correct port.
Solution/Issue
19