Printing Problems - Samsung SCX-3405 User Manual

Printing problems

Condition
The machine does not The machine is not receiving power.
print.
The machine is not selected as the default
machine.
Check the machine for the following:
• The cover is not closed. Close the cover.
• Paper is jammed. Clear the paper jam (see "Clearing paper jams" on page 95).
• No paper is loaded. Load paper (see "Loading paper in the tray" on page 42).
• The toner cartridge is not installed. Install the toner cartridge (see "Replacing the toner cartridge" on page 77).
• Make sure the protect cover and sheets are removed from the toner cartridge (see "Replacing the toner cartridge" on page 77).
If a system error occurs, contact your service representative.
The connection cable between the computer and
the machine is not connected properly.
The connection cable between the computer and
the machine is defective.
The port setting is incorrect.
Possible cause Suggested solutions
Connect the machine to the electricity supply first. If the machine has a
button on the control, press it.
Select your machine as your default machine in Windows.
Disconnect the machine cable and reconnect it (see "Rear view" on page 23).
If possible, attach the cable to another computer that is working properly and print a job.
You can also try using a different machine cable.
Check the Windows printer settings to make sure that the print job is sent to the correct
port. If the computer has more than one port, make sure that the machine is attached to
the correct one.
(Power)
288
6. Troubleshooting