Wall Bracket Assembly - Samsung SyncMaster 320MX User Manual

Wall Bracket Assembly

Note
There are two hinges(left and right). Use the correct one.
1. Insert and tighten the Captive Screw in the direction of the arrow.
When done, mount the wall bracket on the wall.
There are two hinges(left and right). Use the correct one.
A -
B -
C -
D -
2. Before drilling into the wall, check if the length between the two locking holes at the back of the
product is correct.
If the length is too short or long, loosen all or some of the 4screws on the wall bracket to adjust
the length.
A -
Introduction
Captive Screw
Wall Bracket
Hinge (Left)
Hinge (Right)
Length between the two locking holes